Downloadable Brochure:
AT-400
The Dotul AT-400 Dowel Driver is a free-standing single dowel insertion machine. The operator pre-glues the dowel hole, places the piece in front of the driver and presses on a foot pedal to insert the dowel. Dotul also offers machines that will make dowels. Ask your dealer for more information on these machines.
Features Include:
- The AT-400 Dowel Driver will drive ½” x 4” wood dowels to a preset depth into pre-glued dowel holes.
- Table shims allow for quick changes between 1 3/8” + 1¾” + 2¼” thick doors.
- The adjustable dowel driver rod will allow the operator to adjust the depth of the dowel to be driven into the pre-drilled dowel hole.
- The machine will drive the dowels as fast as the operator can pre-glue the dowel holes and press the foot pedal.
- The customer must specify the hole centers when ordering the dowel driver.
Specifications: |
|
Air Requirements |
90 PSI |
Floor Space Required |
2’6” wide x 4’ deep |
Driver Rod Length |
½" x 9" adjustable |
Adjustment for Rod |
¾" |
Cylinder Stroke |
4" dia. x 6" stroke |
Clamp Cylinder |
4" dia. x 2" stroke |
Dowel Hole Spacing (must be specified) |
1½" 2" 2¼" 2½" |
Table Size |
24" wide x 16" deep |